简单测试

QGC测试.py

@@ -0,0 +1,82 @@
+import time
+import math
+from drone_controller.qgc_router import QGCMissionReceiver
+
+def gps_to_ned(lon, lat, alt, home_lon, home_lat):
+    """
+    仅基于经纬度计算东向(E)和北向(N)，忽略高度。
+    home_lon, home_lat: 原点经度、纬度
+    lon, lat: 目标点经度、纬度
+    返回 (E, N) 单位：米
+    """
+    from pyproj import Transformer
+    # 1. 创建 WGS84 经纬度 -> ECEF 的转换器（高度固定为0）
+    transformer = Transformer.from_crs(
+        {"proj": 'latlong', "ellps": 'WGS84', "datum": 'WGS84'},
+        {"proj": 'geocent', "ellps": 'WGS84', "datum": 'WGS84'},
+        always_xy=True
+    )
+
+    # 2. 目标点和 home 点的 ECEF 坐标（alt=0）
+    x_t, y_t, z_t = transformer.transform(lon, lat, 0)
+    x_h, y_h, z_h = transformer.transform(home_lon, home_lat, 0)
+
+    # 3. 差值
+    dx, dy, dz = x_t - x_h, y_t - y_h, z_t - z_h
+
+    # 4. 旋转到 ENU（只取 E,N）
+    phi = math.radians(home_lat)
+    lam = math.radians(home_lon)
+    sin_phi = math.sin(phi)
+    cos_phi = math.cos(phi)
+    sin_lam = math.sin(lam)
+    cos_lam = math.cos(lam)
+
+    E = -sin_lam * dx + cos_lam * dy
+    N = -sin_phi * cos_lam * dx - sin_phi * sin_lam * dy + cos_phi * dz
+    U = -alt
+
+    return E, N, U
+
+def main():
+    HOME_LAT = 34
+    HOME_LONG = 113
+
+    # 创建一个用于存放本地局部坐标的列表
+    points = []
+
+    qgc_receiver = QGCMissionReceiver(connection_str="udpin:0.0.0.0:14550", home_lat=HOME_LAT, home_lon=HOME_LONG)
+    qgc_receiver.start()
+
+    print("\n[MainLoop] 核心控制线程（线程2）启动，等待地面站下发任务...")
+
+    try:
+        while True:
+            current_mission = qgc_receiver.get_waypoints()
+
+            if not current_mission:
+                # 列表为空，原地挂起
+                print('[MainLoop] 当前无航点任务...', end='\r')
+                time.sleep(1.0)
+                continue
+
+            print(f"\n[MianLoop] 检测到新航线任务! 包含{len(current_mission)} 个航点, 准备进行香橙派自动巡点飞行控制。。。")
+
+            for wp in current_mission:
+                y, x, z = gps_to_ned(*wp,home_lon=HOME_LONG, home_lat=HOME_LAT)
+                points.append({'x': x, 'y': y, 'z': z, 'yaw':0})
+                print(f"--> 状态机驱动：开始前往目标航点 #{wp['seq']} -> 本地坐标 NED: X={x:.2f}米, Y={y:.2f}米, Z={z:.2f}米")
+
+                time.sleep(3.0)
+                print(f"--> 航点 #{wp['seq']} 任务处理完毕！")
+
+            print("[MainLoop] 航线列表中所有航点全部执行闭环,任务完毕,开始清空队列...")
+            print(points)
+            qgc_receiver.clear_waypoints()
+            points.clear()
+    
+    except KeyboardInterrupt:
+        qgc_receiver.stop()
+        
+if __name__ == '__main__':
+    main()